LK Metrology has made the announcement that they have opened th

  • Today, January 23, 2020, marked the official beginning of operations for the brand-new CMM measurement services department that is housed within LK Metrology's recently opened North American Tech Center.



    The total measurement volumes may reach as high as 2.15 at their highest point.

    The LK Metrology Software gives its users access to a wide range of capabilities, some of which are detailed in the following paragraphs:

    CMM inspection of dimensions for complicated geometries, freeform surfaces, and thin-walled parts, as well as reverse engineering and non-contact scanning. CMM can also be used for scanning. The CMM technology has gone through yet another iteration, and its introduction has already shattered the quality standards that have been in place for such a considerable amount of time. Where does the problem stem from, exactly? Manufacturers now have the ability to improve the efficiency of their processes, develop new markets, or innovate their own current cmm inspection services offering as a result of the increased development of digital capabilities as well as new and more efficient materials. This was something that could not have been prevented under any circumstances. In addition to this, they were responsible for ensuring that the data obtained from CMMs and other metrology devices was useful to the manufacturing company in its day-to-day operations. But we are pleased with everything that we manufacture and the extraordinary depth and breadth of our CMM Inspection Companies line, which includes everything from a low-cost gage that can be purchased for fifty euros to large, automated assembly and inspection machines that can cost up to three million euros. We are proud of everything that we produce.

    Forty different characteristics need to be taken into account during the process of aligning the measuring points and programming the inspection software. The particular illustration in question demonstrates that there are eighty points on the probe that are zero.

    MG Marposs has developed into the prosperous company that it is today thanks in large part to the knowledgeable employees that it has on its payroll. When it comes to off-line performance testing, Fausti, who is the Managing Director of the company, says that we are able to fulfill all of the requirements that the customers have outlined for us to implement. The way in which we conduct our business is governed by this rule.

    In the past, manufacturers might have been able to get away with a precision of one tenth of a millimeter, but these days, they are required to ensure that their products are accurate to the level of one hundredth of a millimeter. In the past, manufacturers might have been able to get away with a precision of one tenth of a millimeter. Frizza explains that his company routinely receives orders for components that must adhere to tolerances of only a few micrometers, and that it can be quite difficult to meet these requirements. The requirements state that the components must not deviate from the specified dimensions in any way. It is not an easy task to achieve this level of accuracy, which is why MG Marposs continues to make ongoing investments in its quality assurance area. In order to achieve this level of accuracy, it is important to note that it is not an easy task.

    Six years ago, in order to better meet the demands of its customers for components of ever-higher quality, MG Marposs made the decision to expand the capabilities of its measuring lab. This was done in order to better serve its customers. This was done in order to provide superior support for the company's clients. At our facility in Brescia, which is located in the Lombardy region of Italy, we introduced one ZEISS MICURA and four ZEISS PRISMO ultra systems in the year 2011. These measuring instruments provide results of measurements on which one can depend on being accurate on a consistent basis. MG Marposs is impressed by the speed and attention to detail displayed by service technicians from ZEISS; however, CMM Inspection Companies the Italian company also places a high value on how ZEISS views itself. In addition to that, there is the possibility of some very slight degree of measurement uncertainty. MG Marposs will only be able to guarantee that the measuring uncertainties of the machines and equipment that are measured utilizing the masters will be kept to an absolute minimum if they do it this way. The majority of the time, we put ZEISS machines to work in a couple of different capacities.

    And secondly, for the purpose of certifying masters so that our clients can reap the benefits of inspection machines that have been optimally adjusted on their behalf by our employees. One possible explanation for why we choose to work with ZEISS systems is that we want to err on the side of caution whenever possible. With this, we are able to capture characteristics that are essential for measuring technology, but which we were not able to reach with other coordinate measuring machines. These characteristics include accuracy and repeatability, both of which are crucial for accurate measurements.