PE protection film has good characteristics

  • PE protection film is easy to peel off during use, is not easy to age, and has a long-lasting effect. The peeling force will only increase slightly during use. When the entire product is exposed to sunlight, its use period is still very long, up to 6 months to 1 year. No pollution or corrosion during use. PE protection film has excellent mechanical properties, and has moderate tensile strength, modulus, elongation, etc., to meet user requirements. The protective film has no activity on the surface of the protected material and has good adhesion to the protected material. When handling or processing materials, the protective film will not warp or fall off.

    pe protection film

    PE protection film has excellent weather resistance and adhesion stability. After a few days or a long time, the peeling force will increase and it will be easy to peel. There is no residual glue on the protective surface and no influence. After using the PE protective film for a period of time, the center is still good, but the main reason for the warping at both ends is that the protective profile is elongated during the process of attaching the protective profile. After pasting, there will be a high temperature environment and unnecessary deep drawing.

    Since customers in tropical regions have problems with their products, the effect of PE protective film cannot be displayed well, so PE protective film should pay attention to the impact of environmental temperature difference during the manufacturing process on the use of the product, and try not to have any problems during the application process. Necessary surface stretching.

    From the material point of view, the PE stretch film is soft and the PET film is durable. Protective film of two different materials. In terms of stretching speed, PE stretched film has excellent expandability. The stretching speed ranges from 150% to 300%, which can achieve different effects for different purposes. The PET film does not stretch, is not easy to deform, and has good hardness. The PE protective film is relatively soft, so if you pick it up and use it or shake it, the PE protective film will be silent, but the PET protective film will be noisy. In addition, the heat resistance of PE is generally 60 degrees.

    PE Protective Film has a wide range of applications, such as the hardware industry: PE protective film is used in the hardware industry for computer cases, galvanized sheet stamping, aluminum, stainless steel, titanium, plastic steel, glass, solar panels, etc.

    Optoelectronic industry: PE protective film is used in LCD liquid crystal displays, backlight boards, cold light films, membrane switches, mobile phone screens, etc. in the optoelectronic industry. Plastic industry: PE protective film is used in the surface protection of ABS, PP injection products, PVC sheets, acrylic sheets, electrical appliances, plastic lenses, and spray paint parts in the plastic industry.

    Printing industry: PE Protective Film application in the printing industry can protect the surface of printed nameplates such as PVC, PC board, aluminum board, and film.

    Wire and cable industry: PE protective film is used in the wire and cable industry to protect copper wires, semi-finished products, finished products, finished products in rolls, etc., attached to the shaft. It can effectively prevent dust pollution and has anti-oxidation function. Anti-fouling effect.

    Finally, in the electronics industry, in production, there are two PE Protective Film applications, which protect the finished and semi-finished products from scratching or damaging the assembly line and play a protective role. PE Protective Film dealer-The PE Protective Film for Cotton picker exclusively produced by Xinhao can be used in all kinds of cotton pickers. Our PE Protective Film for Cotton picker is widely praised in China. Welcome to contact us to learn more.


    Recommended reading:

    Characteristics of plastic protective film

    How to define clear protective wrap

    Introduction of electrostatic protective film and composite film