The Problems Of Carpet Protective Film

  • Problem 1: Although the carpet protective film can be effectively peeled off, there are protective film performance words left on the surface of the profile.

     

    This problem often occurs in some low-grade carpet protective film , which is because when the protective film is combined with the protected profile, there is sunlight and water and other suitable environment, and a kind of chemistry, this kind of chemistry is no good way to avoid, because its reproduction does not have a rule to find.

     Carpet Protective Film

    The second problem is that the carpet protection film is difficult to peel off. When the product is installed and peeled off, the carpet protection film cannot be effectively peeled off.

     

    There are two possible reasons for this, one is that the adhesive used in carpet protective film products is not a special adhesive for protective film. If this is the case, of course, the protective film is very good when it is attached, but it will be very difficult to peel off, which is also the most common problem of some illegal protective film manufacturers. There is also a possibility that the material used in the carpet protective film master tape is too soft to withstand the pulling force when peeling off, and the phenomenon of fracture when peeling off, which is a great headache for users.

     

    The third problem is that the most reflected by users is the problem of peeling off the carpet protective film.

     

    When users tear off the carpet protective film from the surface of the profile after the installation and construction, the adhesive on the surface of the carpet protective film does not remain with the protective film, but on the profile products, which is the most unwanted by users. It may be that the pressure adhesive used in the protective film products does not meet the regulations, that is, it is too sticky, resulting in the protective film products being peeled off, the external tension is greater than the internal Yin force, and the residue on the profile.

     

    Problem 4: The paste between the protective film and the protected product is not firm.

     

    In the process of transportation and use, the phenomenon of falling off, the cause of this problem is the opposite of the previous problem, the biggest possibility is that the carpet protective film in the production of the use of adhesive viscosity is not enough. Another possibility is that the pressure of the press used by the user when posting the mold is not enough, or the surface of the profile is not clean, there is dust or paint, etc., which affects the adhesive effect of the adhesive!

     

    Problem 5: The protective film performs well in the middle after using for a period of time, but fins up at both ends.

     

    The main reason for this phenomenon is that the carpet protective film is stretched to a large extent during the process of pasting with the protected profile, and after the posting, when it meets the high temperature environment, there is an unnecessary shrinkage phenomenon.

     

    Wuxi Xinhao Protective Film Co., Ltd. has focused on the research of pressure sensitive adhesive since 1980, which deals in professional manufacturing of PE surface protective film with advanced skills in this filed. We develop new products continuously to satisfy the requirements construction Markets.Please contact us.